The Hita package by Asvape was despatched from HealthCbin for the aim of assessment.
Asvape Hita Kit is a pod machine based mostly on a mechanical mod design. It combines pod and mechanical design. The retro look of the mechanical lever combines the high-quality taste of the POD machine, which is moveable and protected to function. Asvape Hita Mech Pod Kit is powered by a built-in 1000mAh battery with max 30W output, which might simply help your long run requirement. And use type-c charging port for quick charging, quicker and safer, 1h might be totally charged, extra-long battery life. In addition, the intelligence chipset Reekbox developed by Asvape, which might mechanically determine completely different coil resistance and match the most effective output energy. Create good fogging results, whether or not you’re simply getting began or superior gamers can rapidly grasp. Asvape Hita Mech Pod Kit additionally options indicator gentle with the hearth button at all times inform the consumer as to the present battery ranges. Asvape Hita Mech Pod comes with 3ml capability. Convenient filling of juice liquid by opening the facet silicone plug. Equipped facet air inlet adjustment. The set comes with two mesh coils for DTL and MTL vaping. Asvape Hita can also be appropriate with RBA coil for DIY vaping. Let’s see the way it vapes on this assessment.
- Dimensions: 92 x 25mm
- Weight: 50g
- Battery capability: 1000 mAh
- Output energy: 5-30W
- Voltage: 3.2-4.2V
- Charging: 5V/1A
- Charging port: USB Type-C
- Resistance vary: 0.3-3.0 ohms
- Cartridge diameter: 24 mm
- Cartridge capability: 3ml
- Coil resistance: 0.5 ohm / 1.0 ohm / RBA
- 1 x Hita battery
- 1 x Hita cartridge
- 2 x Coils
- 1 x Type-C cable
- 1 x Spare 510 drip tip
- 1 x Lanyard
- 1 x QC card
- 1 x Warranty card
- 1 x User guide
Design & Quality
My first impression on this package once I opened the field – is that this a 18350 mech package with a pod cartridge? Then I attempted to screw the botton “battery cap”, clearly failed. Have to say it is a bizarre package in look, however on the identical time, we should always give Asvape some thumbs up for the innovation. OK, the “mech mod” is only a battery with 1000mAh capability, all decorations on the battery have been simply to make it seems to be like a mech mod, truly they did it.
The connection half between the pod and battery is similar story – magnets, however the one I acquired is just not sturdy sufficient like that of VOOPOO Drag X.
Everything arrived completely on the proper place within the field.
The Hita machine comes with a 1000mAh built-in battery, which cab be charged through the USB C port on the backside of the machine with 5V/1A charging velocity. So it could want 60 minutes to get it totally charged. For a USB C machine, 1A charging is simply too sluggish. And you can’t make it stand whereas charging because the charging gap is on the backside, additionally no pass-through, not a giant deal for me.
There is 1 button. Press it 5 instances to energy on/off the mod, and press it to fireside. Adjust your wattage? All the wattage choice is dealt with by the Reekbox chip inside, and can set itself based mostly on the resistance of your coil.
The fireplace button may also gentle as much as let you understand the battery degree. The battery degree for Red gentle must be very low, must cost it ASAP.
- Green – 50-100%
- White – “Low” – 49%
- Red – “Low”
The Pod, Coils & RBA
The whold pod seems to be like ultem in coloration, undecided it’s ultem or PCTG in that coloration, identical with the replaceable 510 drip ideas. The pod holds 3ml e-liquid which isn’t a nasty capability. There are 2 coils within the field and the RBA coil can also be accessible, want to purchase individually.
The pod may be very clear that can assist you view the juice degree clearly with out taking the pod out of the machine. And the large facet filling gap matches every kind of bottles. While it’s possible you’ll discover it arduous to switch the coils – arduous to tug the previous coil out of the pod. Asvape ought to enhance it – study extra from VOOPOO perhaps.
The RBA is a single put up deck, constructing & wicking may be very straightforward for any skilled vapers.
0.5ohm coil designed for DTL vaping, flavour is fairly good whereas the vapor manufacturing didn’t meet my expectation. The coil life is over common, I’ve stuffed it at the very least 13 instances earlier than I observed the flavour dropping. I vaped it with 50VG e-liquid.
1.0ohm coil designed for MTL vaping, properly that is inferior to 0.5ohm coil in taste efficiency. This coil lasted for 10 refills.
RBA coil, I’ve a great expertise with it, happy with the flavour and vapor manufacturing.
Leaking or condensation? Yes, I consider it’s condensation, it’s possible you’ll want to wash the pod backside after vaping.
For me, if I’m going to make use of it wholeday lengthy simply with this package, I’ve to cost it twice.
- Solid construct high quality
- Pocketable and light-weight
- Adjustable airflow
- Replaceable 510 drip tip
- Easy operation
- Clear pods to see juice degree
- RBA deck accessible to make your individual coils
- 510 adapter accessible to make use of any atomizer on the mod
- No pass-through
- 1A charging for USB C is just not good
- Pain to alter coils
Design – 8.5/10
Flavor – 8/10
Vapor Production – 7.5/10
Quality – 8.5/10
Ease of Use – 8/10
Value for Money – 8/10
Well, all in all, it is a over common vape machine although not the highest degree. If you’re a mech package followers, it’s possible you’ll like its look and check out it identical to a mech machine. Everything is sweet, together with adjustable airflow, 510 drip tip, over common taste efficiency. $21.58 for a package like this, why not have a attempt!
- Buy it Here